Baseus 1000A 600A Jump Starter Booster Power Bank 12000mAh 12 V – CRJS03-01

Baseus 1000A 600A Jump Starter Booster Power Bank 12000mAh 12 V – CRJS03-01

Baseus Jump Starter Booster is a jump starter which is strong enough to let you start your car up to 50 times per charging! An efficient, safe, handy and user-friendly starter is a must-have in every garage.

Content of the set

• 1 x jump starter
• 1 x cable type-C
• 1 x Smart Starter clamp
• 1 x operating manual in Chinese and English

Major features

• Very high peak current of 1000 A and starting current of 600 A
• You can start the car up to 50 times on full charging
• The built-in display which informs you about battery level in jump starter
• Highly efficient, polymer secondary cells are resistant to very low and high temperatures
• Very low power consumption in a standby mode. It can keep up to 85% of energy a year after last full charging, if not used
• Built-in protection preventing damage of devices connected
• Thanks to built-in LED lights, it may be used as a traditional flashlight
• The set includes crocodile clips used to connect to the battery, and USB – USB-C cable
• The peak current of 1000 A leads to an instant car start-up
• Adapted to many vehicles with 12-V batteries
• Remains fully operational at very low and high temperatures
• Up to 50 start-ups per charging
• Digital screen with data on battery level
• Built-in flashlight
• The set includes crocodile clips, USB -USB-C cable
• Power Bank for mobile phone charging
• 9 degrees of security.

Security

Security is a priority. For this reason the following built-in functions of Baseus model assure stable and failure-free use of the device:

1. Top-quality lithium-polymer batteries
2. Protection against overcharging
3. Voltage stabilization
4. Protection against electric shock
5. Protection against short-circuit
6. Protection against excessive discharge
7. Protection against reversed connection
8. Protection against overheating
9. Over-current protection

Due to size and technical parameters, the device may be taken on the plane.

How to correctly start the car with a jump starter? 3 steps:

1. Connect. Insert smart ignition clamps to EC5 interface of the starter – flashing red and green lights inform you about connection status.
2. Clamp. Raise your car hood. Connect wires – positive (red) with battery terminal marked with plus and negative (black) on negative pole in the battery.
3. Start the car. Go back to the vehicle and start it. Before you start driving, remove the starter from the car battery.

Click here for Baseus official web page link

Click here to check our other Jump Starters