Baseus 20000mAh 2000A Super Energy Max Car Jump Starter – CGNL020001

Baseus Super Energy Max Car Jump Starter 20000mAh 2000A – CGNL020001

Baseus Super Energy Max Car Jump Starter is a device with excellent parameters, reaching up to 2000A of peak current. Powerful enough to allow you to start your car up to 50 times after charging!

Efficient, safe, handy, and at the same time intuitive to use, the starter should be in every garage!

Battery & Output

• It achieves a very high peak current of 2000 A and a starting current of 1000 A.
• When fully charged, it can perform up to 50 emergency starts of the car.
• Built-in display that informs about the battery charge level in the jump starter.
• High-performance polymer battery cells are resistant to very low and high temperatures.
• Very low power consumption in standby mode. It can maintain up to 85% of the accumulated energy after a year from the last full charge when it was not used.

Alligator Clip

• The set includes alligator clips (crocodile clips) for connecting to the battery and a USB – USB Type C cable.

Peak Current & Capacity

• The peak current of 2000 A is an instant start of the car
• Fits many vehicles with 12V batteries
• It works without problems at very low and high temperatures
• Up to 50 starts on a single charge

Safety & Security

Baseus model allows for stable, trouble-free use of the device, which ensures the built-in functions with 9 levels of security:

1. Top quality lithium polymer batteries
2. Overcharge protection
3. Voltage stabilization
4. Shock protection
5. Short-circuit protection
6. Over discharge protection
7. Reverse connection protection
8. Overheat protection
9. Overcurrent protection

Due to the size and technical parameters, the device can be taken on board the plane.

Other Special Features

• Digital screen with battery level information
• phone charging power bank
• Built-in protections to prevent damage to connected devices.
• Built-in LEDs, it can be used as a traditional flashlight.

How to properly start the car with a jump starter? 3 steps:

Connect:

• Insert the smart ignition terminals into the starter EC5 interface – connection status is indicated by flashing red and green lights.

clamp:

• Raise the hood of the car. Connect the wires – positive (red) to the positive battery clamp and negative (black) to the negative pole of the battery.

Start the car:

• Return to the vehicle and start the car. Remove the starter motor from the battery before driving

Click here for Baseus official web page link

Click here to check our other jump starters